Description
Wakelife G11 4D LED Light Therapy Mask Demo
Specification
| Item | Specification (English) |
|---|---|
| Display Screen | TFT Screen |
| Rated Power | Mask: 6W, Neckpiece: 4W |
| Battery Capacity | 5000mAh (21700, 3.7V); Supports 5–7 full treatments per charge |
| Dimensions | Mask: 345×225×181 mmNeckpiece: 492×149×6 mmController: 126×40×45 mm |
| Functional Modes | 1. LED Type: 5050 quad-chip (wavelength ratio: 415:590:630:850/1072 = 1:1:1:1)LED Quantity:• Mask: 90 LEDs (12 are 1072nm)• Neckpiece: 57 LEDs |
| 2. Wavelengths:• Blue: 415nm• Yellow: 590nm• Red: 630nm• Near-Infrared: 850nm• Far-Infrared: 1072nm | |
| 3. Therapy Modes:• Repair Mode: 630nm for 10 minutes• Skin Rejuvenation Mode: 590 + 630nm for 10 minutes• Anti-Aging Mode: 630 + 850/1072nm for 10 minutes | |
| • Morning Skincare Mode: 590 + 630 + 850/1072nm for 10 minutes• Acne Treatment Mode: 415nm for 10 minutes• Night Care Mode: 590nm (2 min) → 630 + 850/1072nm (5 min) → 415nm (3 min) | |
| 4. Irradiance: 30–40 mW/cm² | |
| 5. Pulse Mode: Optional 10Hz pulse function available in each mode | |
| 6. Brightness Levels: 3-level adjustment – Level 1: 50%, Level 2: 75%, Level 3: 100% | |
| Button Functions | 3 control buttons: Power, Brightness, Pulse |
| Port Type | USB-C × 2 |
How to Use
- Power Button: Press and hold for 3 seconds to turn on the device. The lights will activate.
- Brightness Control: Short press to cycle through 3 energy levels — 50%, 75%, and 100%.
- Timer: Each mode runs for a default session time of 10 minutes.
- Mode Selection: After powering on, press the power button again to switch between 6 available treatment modes.
- Pulse selection: you can press the pulse function key in any mode.
Light Sensitivity Test
- NOTE: DO NOT USE THIS PRODUCT IF YOU ARE ONE OF THE FOLLOWING PEOPLE
1. People who are pregnant, preparing for pregnancy,or breastfeeding;
2. people with light sensitivity or taking any medication that may cause photosensitivity: people with hereditary diseases of the eve(such as lupus erythematosus, photosensitive eczema or albinism, etc.) - Step 1: Place the device on your arm and turn on the switch to iradiate for 10 minutes.lf symptoms such as redness or itching appear onthe skin,it indicates that you may have photosensitive skin and it is recommended that you stop using it, or consult a dermatologist beforeusing it again.
- Step 2: Before use, please clean your face and keep it dry (without makeup) to prevent photosensitive ingredients that may be containedin cosmetics from affecting the efficacy of skin care.
- Step 3: After use, the skin may appear red, which is a normal reaction ofthe skin, and willreturn to normal within 1-2 hours.lfyou feelburning or any other discomfort during the process, please stop using it immediately.
