Description
G06 LED Beauty Mask Demo Video
G06 Laser Mask Features
1. Four-Color Light Therapy for Targeted Skin Care
- 🔴 Red Light (665nm Laser): Boosts collagen production, brightens skin tone, and reduces fine lines.
- 🔵 Blue Light (460nm): Anti-bacterial and anti-inflammatory, ideal for oily and acne-prone skin.
- 🌐 Infrared Light (850nm Laser): Deep penetration to enhance blood circulation and improve skin elasticity.
- ✨ Near-Infrared Light (1064nm): With strong penetration power, it reaches the dermis and subcutaneous tissues to treat deep skin concerns. It effectively targets melanin and hemoglobin, breaking down pigmentation (e.g., dark circles, redness) without harming surrounding tissues.
- Overall Benefits: Brightens skin, refines texture, and enhances overall skin health.
2. Two Treatment Modes for Customizable Skincare
- Mode 1(665nm + 850nm + 1064nm Laser): Deep rejuvenation mode to improve blood circulation, repair collagen, and enhance skin elasticity.
- Mode 2(460nm + 850nm Laser): Targeted care for specific skin concerns.
3. 3D Silicone Mask Design for Maximum Comfort & Coverage
- Ergonomic Fit: Conforms perfectly to facial contours for even light distribution and enhanced treatment results.
- Soft & Skin-Friendly: High-quality silicone material ensures comfort and suitability for all skin types.
4. Smart Timer for Safe & Efficient Treatment
- Built-in intelligent timing system allows users to set the optimal treatment duration, ensuring maximum effectiveness for each session.
Laser Mask Specifications
| Product Model | G06 |
| Number of LED Beads | 72 beads; (236 beads) 3227 VCSEL Laser beads |
| Wavelength | 665 + 850 + 1064 nm |
| Modes | Mode 1: 665 + 850 + 1064 nm full laser (72 + 72 + 20 = 164 beads) |
| Mode 2: 460 (LED) + 850 (laser) (72 + 72 = 144 beads) | |
| Battery Capacity | 720 * 2 = 1440 mAh |
| Color | Standard beige |
| Working Time | Timer: 5 / 10 / 15 minutes |
| Dimming: 50% / 75% / 100% | |
| Mask Size | 640 * 220 * 5.8 mm |
| Power | DC/5V 2A (1440 mAh) USB charging |
| Accessories | USB cable, packaging box, user manual, velvet bag |
LED mask specifications
| Number of LED Beads | 72 beads; (288 beads) 3227 LED beads |
| LED Bead Wavelength | 630 + 630 + 460 + 850 nm = 2:1:1 |
| Modes(Switched via M button) | Mode 1: 630 + 630 + 850 (3 beads lit) |
| Mode 2: 460 + 850 (2 beads lit) | |
| Mode 3: 630 + 630 + 460 + 850 (4 beads fully lit) | |
| Battery Capacity | 720 * 2 = 1440 mAh |
| Color | Standard beige |
| Working Time | Timer: 5 / 10 / 15 minutes |
| Dimming | 50% / 75% / 100% |
| Mask Size | 640 * 220 * 5.8 mm |
| Power | DC/5V 2A (1440 mAh) USB charging |
| Accessories | USB cable, packaging box, user manual, velvet bag |
G06 User Guide
Before using the product, please perform a patch test on your arm for 1 minute.
If no discomfort occurs, you may proceed with normal use.
To restart the device, simply turn it on again.
If you need to interrupt the treatment during use, turn off the device and store it in the packaging box.
Quick Start Guide
Step 1: Clean your face and keep the skin dry.
Step 2: Adjust the strap and wear the mask.
Step 3: Press and hold the power button (see Figure 1) for 2 seconds to turn it on.
Step 4:
Short press M to switch modes: M1 → M2 → M3
Long press M (2 sec) to turn on/off
Auto shut-off after 5 minutes of no use
Step 5:
Set timer: 5 / 10 / 15 minutes
Adjust brightness: Low / Medium / High
Step 6: Enjoy the session. After it ends, follow your regular skincare routine.
Light Sensitivity Test
- NOTE: DO NOT USE THIS PRODUCT IF YOU ARE ONE OF THE FOLLOWING PEOPLE
1. People who are pregnant, preparing for pregnancy,or breastfeeding;
2. people with light sensitivity or taking any medication that may cause photosensitivity: people with hereditary diseases of the eve(such as lupus erythematosus, photosensitive eczema or albinism, etc.) - Step 1: Place the device on your arm and turn on the switch to iradiate for 10 minutes.lf symptoms such as redness or itching appear onthe skin,it indicates that you may have photosensitive skin and it is recommended that you stop using it, or consult a dermatologist beforeusing it again.
- Step 2: Before use, please clean your face and keep it dry (without makeup) to prevent photosensitive ingredients that may be containedin cosmetics from affecting the efficacy of skin care.
- Step 3: After use, the skin may appear red, which is a normal reaction ofthe skin, and willreturn to normal within 1-2 hours.lfyou feelburning or any other discomfort during the process, please stop using it immediately.
